Zanussi ZHC 916X 지침 책자 - 페이지 17

{카테고리_이름} Zanussi ZHC 916X에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC 916X 21 페이지. Cooker hood
Zanussi ZHC 916X에 대해서도 마찬가지입니다: 지침 책자 (24 페이지)

Fixing the chimney

Loosen the screws M fixing the two parts of the

chimney and pull the inner section I (Fig. 21)

almost all the way out. Remove the protective film

Rest the lower section of the chimney in its housing

on the top of the hood canopy. Lower the ducting

fan unit until it reaches the wall bracket S and fix

it using the screw H provided (Fig. 22).

Fit cover D provided on the wall bracket S (Fig.

23).

Fix the chimney A to the hood canopy C using

four screws provided (Fig. 24).

Insert the transparent seal Q provided, so as to

eliminate any play between the two parts of the

chimney (Fig. 25). Lock the screws M.

Remove the support rod B.

Ducting or re-circulation fitting

Ducting fitting:

This is possible in all forms of installation.

Connect the air outlet to the external ducting

system.

Remove the activated charcoal filter (if fitted)

inside the hood canopy (See Maintenance and

Cleaning).

Re-circulation fitting:

This is only possible with the air outlet directed

upwards. Fit the venting grille G onto the air outlet

(Fig. 26). The activated charcoal filter should be

fitted inside the hood canopy after connection.

INSTALLATION INSTRUCTIONS