Zanussi ZHC4284 사용자 설명서 - 페이지 15

{카테고리_이름} Zanussi ZHC4284에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC4284 44 페이지. Zanussi chimney hood product brochure
Zanussi ZHC4284에 대해서도 마찬가지입니다: 특징 (5 페이지)

페이지 인쇄

Clearance Height

The cooker hood is designed to be fitted over a cook-

ing appliance at the clearance heights stated, providing

the maximum output of the appliance beneath does

not exceed the maximums quoted in the Technical

Specifications.

If the output of the appliance below the cooker hood

exceeds the maximum outputs quoted, please refer to

the cooker manufacturer's installation instructions.

A clearance height of 650mm (25 1/2 ") is required when

installed above a built-in electric hob, or 700mm (27 1/2")

when installed above a built-in gas hob.

A clearance height of 685mm (27") is required when

installed above a slot-in electric cooker, or 787mm

(30 1/2 ") when installed above a slot-in gas cooker.

When installed between adjoining wall cabinets, the wall

cabinets must not overhang the hob and the distance

between the underside of the cabinet and the worktop

must be 450mm. If the height of the wall cabinet is

less than 450mm, a gap of 50mm must be maintained

either side of the hob.

This cooker hood must not be installed above a

cooking appliance with a high level grill.

The hood can be installed above these heights but

for optimum performance it should be installed at the

distances quoted for the appropriate heat source.

This appliance can be used in either extraction mode

(ducting) or recycling mode (filtering).

The hood is supplied suitable for recirculation with the

charcoal filters fitted.

When used in the extraction mode (ducting) the char-

coal filters are not required and must be removed and

destroyed.

INSTALLING THE COOKER HOOD

A: Built-in Electric Hob:

B: Built-in Gas hob:

C: Slot-in Electric Cooker: 685mm clearance

D: Slot-in Gas Cooker:

Hob

650mm clearance

700mm clearance

787mm clearance