Zanussi ZHC9454X 사용자 설명서 - 페이지 18

{카테고리_이름} Zanussi ZHC9454X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC9454X 28 페이지. Zanussi washer dryer brochure
Zanussi ZHC9454X에 대해서도 마찬가지입니다: 특징 (5 페이지), 사양 (7 페이지)

페이지 인쇄

1. Control Panel

Make sure that the cooker hood is disconnected from the power supply before carrying out

the installation.

Remove the anti-fat filter and the carbon filter support frame.

• Mark the wall with a centre line, this will aid mounting procedure (1), position the template so that

the mid line printed on the template matches with the centre line previously drawn, the lower side

of the template corresponds to the lower side of the hood once mounted (2).

• Make 4 holes; 2 above to fix the support bracket of the hood and 2 below for definitely fixing the

hood. Insert 4 dowels in the wall.

Fix the support bracket of the hood with 2 screws (3).

• Drill two holes Ø 8mm on the upper side close to the ceilling, fit two wall plugs (4) (In case the

hood is to be used in filter version, mount the deflector F on the chimney support with 4 screws)

and fix the chimney support G with two screws (5).

• Hook the hood on (6).

• Adjust the position of the hood (7-8)

• Fix the hood definitively with 2 screws and washers (9).

• Fit an exhausting pipe (10) to connect the outlet hole B of the hood to the outside (Extractor

hood) or to the deflector F (Filter version).

• Make electrical connection (11).