Zanussi ZHP 637 설치 및 사용 설명서 - 페이지 5

{카테고리_이름} Zanussi ZHP 637에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHP 637 11 페이지.
Zanussi ZHP 637에 대해서도 마찬가지입니다: 설치, 사용 및 유지보수 핸드북 (40 페이지), 사용 설명서 (40 페이지)

페이지 인쇄

Drilling the Support surface and Fitting the Hood

• The hood support surface must be 135 mm above

the bottom surface of the wall units.

• Drill the support with a ø 4.5 mm drill bit, using

the drilling template provided.

• Cut a hole ø 125 mm in size on the support

surface, using the drilling template provided.

• Fix using the 4 screws 12a (4,2 x 44,4) provided.

• The hood can be installed either directly on the

bottom surface of the wall units (min. 650 mm

above the hob) using snap-on side supports.

• Cut a fitted opening in the bottom surface of the

wall unit, as shown.

• Insert the hood until the side supports snap into

place.

• Lock in position by tightening the screws Vf

from underneath the hood.

SCREW FITTING

SNAP-ON FITTING