Zanussi ZHT 630 사용자 설명서 - 페이지 12

{카테고리_이름} Zanussi ZHT 630에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHT 630 21 페이지.
Zanussi ZHT 630에 대해서도 마찬가지입니다: 설치 및 유지보수 지침 (17 페이지), 설치 및 사용 설명서 (7 페이지), 사용자 설명서 (16 페이지), 설치, 사용 및 유지보수 핸드북 (32 페이지), 사용자 설명서 (4 페이지)

Please ensure that when the appliance is installed it

is easily accessible to an engineer in the event of a

breakdown.

All installations must comply with the local

authorities requirements for the discharge of

exhaust air.

Incorrect installation may affect the safety of this

cooker hood.

Installation Requirements

Before installation check the wall to which the

cooker hood is to be fitted for electric cables,

water pipes or gas.

If it is necessary to fix the hood to a hollow construction

plaster or partition board structure then it should be suffi-

ciently reinforced to be quite rigid in the area of the cooker

hood mounting brackets, and the appropriate rawl plugs

used for this type of fixing (not supplied).

Ducting

The ducting must be fire retardant 100mm (4ins) in dia-

meter and the length should be no more than:

•

3 metres with one 90° bend

•

2 metres with two 90° bends

Bends of more than 90° will reduce the

efficiency of the hood and reduce the airflow.

The clereance height between the inferior part

of the cooker hood and the hob must be 650

mm ( some models can be fitted at a lower

height from the hob, please refer to the installa-

tion paragraph).

Unpacking

The fittings supplied to install this cooker

hood can be found with the instruction book

inside the packaging and consists of the following:

Ducting spigot

Blanking plate

Wall / suspended fixing template

INSTALLING THE COOKER HOOD