Zanussi GC 20M 사용 및 관리 지침 - 페이지 13

{카테고리_이름} Zanussi GC 20M에 대한 사용 및 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi GC 20M 21 페이지. Cooker zanussi
Zanussi GC 20M에 대해서도 마찬가지입니다: 사용 지침 및 관리 매뉴얼 (20 페이지), 사용 지침 및 관리 매뉴얼 (24 페이지), 사용 지침 및 관리 매뉴얼 (24 페이지), 사용 지침 및 관리 매뉴얼 (20 페이지)

페이지 인쇄

Fig. 13

Position the appliance.

The appliance incorporates a set of

adjustable feet.

By properly adjusting the feet, the

appliance can be set up at the required

height and correctly aligned with the

kitchen furniture or any other surface,

thus ensuring an even spreading out of

liquids in pans and pots.

These adjustable feet are easily accessible

after removing the dish-warming drawer.

To remove this drawer, proceed as follows:

pull out the drawer to the limit stop in

order to slide out completely the side

runners;

shift the front rollers up to the

"buttonholes" of the side runners;

lift up the drawer and slide out the front

rollers;

pull out the drawer and shift the rear rollers

up to the "buttonholes" of the side runners;

lift up the drawer and slide out the rear

rollers;

To replace the drawer, reverse the above

procedure.

Alignment of the worktop

To allow the alignment with the kitchen

unit, the worktop frames are removable:

Remove the two screws (A - Fig. 11) fixing

the gasket (E - Fig. 11) placed on the back

of the worktop and then slide out the

gasket;

Remove the two cover shock absorbers

(B - Fig. 12);

Loosen the four screws (C - Fig. 12) fixing

the side frames (D - Fig. 12) to the

worktop;

Slide forward the two side frames

(D - Fig. 12);

Block the side frames (D - Fig. 12) by means

of the four screws (C - Fig. 12) to the

worktop;

Refit the cover shock absorbers (B - Fig. 12);

Fit the gasket (E - Fig. 13) on the front

side of the worktop and fix it by means

of the two screws (A - Fig. 13).