Zanussi ZCG62256 사용자 설명서 - 페이지 18
{카테고리_이름} Zanussi ZCG62256에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCG62256 28 페이지.
페이지 인쇄
Stainless steel or aluminium appliances
Clean the oven door with a damp
cloth or sponge only. Dry it with a
soft cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean the
oven control panel with the same
precautions.
Catalytic cleaning
CAUTION!
Do not clean the catalytic surface
with oven sprays, abrasive cleaning
agents, soap or other cleaning
agents. This will damage the
catalytic surface.
Spots or discolouration of the
catalytic surface have no effect on
catalytic properties.
WARNING!
Keep children away when you clean
the oven at a high temperature. The
oven surface becomes very hot and
there is a risk of burns.
Before you turn on the catalytic
cleaning remove all the accessories
from the oven.
The cavity with a catalytic coating is self-
cleaning. It absorbs fat.
To support the self-cleaning procedure, heat
the empty oven on a regular basis.
1. Clean the oven floor with warm water and
washing up liquid, then dry it.
2. Set the oven temperature to 250 °C and let
the oven operate for 1 hour.
3. When the oven is cool, clean it with a soft
and wet sponge.
Cleaning the oven door
The oven door has two panels of glass installed
one behind the other. To make the cleaning
easier remove the oven door.
18
WARNING!
The oven door can close if you try to
remove the internal panel of glass
when the door is still assembled.
Do not lose the screws.
1. Open the door fully and hold the two door
hinges.
2. Lift and turn the levers on the two hinges.
3. Close the oven door to the first opening
position (halfway). Then pull forward and
remove the door from its seat.
4. Put the door on a soft cloth on a stable
surface.
5. Use a screwdriver to remove 2 screws from
bottom edge of door.
1
1
www.zanussi.com