Zanussi ZCG7680 사용자 설명서 - 페이지 43

{카테고리_이름} Zanussi ZCG7680에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCG7680 44 페이지. Zanussi user manual gas cooktop zcg7680, zcg7690
Zanussi ZCG7680에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지)

페이지 인쇄

After 1 minute check that the flame

covers the full width of the burner and is

stable.

Set the oven control to Mk. 2, close the

oven door and check that after about 10

minutes the flame size has reduced.

Turn off the control knob and check that

the oven flames go out.

Checking the main oven

Turn on the oven thermostat control

knob to mark 9. As soon as the burner

is alight the button can be released.

There should now be a low gas rate to

the burner, which is the F.S.D bypass

rate.

When the F.S.D. phial has heated up it

opens the F.S.D valve which allows the

main gas supply to the oven burner.

After 1 minute check that the flame

covers the full width of the burner and is

stable.

Set the oven control to Mk 2, close the

oven door and check that after about 10

minutes the flame size has reduced.

Turn off the control and check that the

oven flames go out.

General note

Instruct the user on how to use the appliance

and its ignition system. Refer the user to the

wording on the inside cover which gives

advice on the safe operation of the

appliance.