Zanussi ZCG7680 사용자 설명서 - 페이지 9

{카테고리_이름} Zanussi ZCG7680에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCG7680 44 페이지. Zanussi user manual gas cooktop zcg7680, zcg7690
Zanussi ZCG7680에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지)

Zanussi ZCG7680 사용자 설명서

The timer

Please note that this is a 24 hour clock, for
example 2.00pm is shown as 1400.
In the following pages we explain how to set
the controls. Read through them a few times
Cookpot symbol
Bell symbol
until you are familiar with the procedure.
If the appliance is switched off on the wall, or
there is a loss of power, the clock will stop
and you will not be able to use the main
oven. When you first switch the electricity
supply on, the timer display will flash.
Set the time of day
Turn the selector knob to 'Manual' then turn
to 'Clock'.
Set the correct time by turning and holding
the setting knob clockwise. Adjust the time
Setting knob
Selector
by turning the setting knob in either direction.
Turn the selector knob back to 'Manual'.
To use the timer
Turn the selector knob to 'Timer'. Turn the
setting knob clockwise until the display
shows the time you want. The bell symbol
(
) will be showing and this will stay lit up
during the time. Our diagram shows the
timer set to 5 minutes.
If you change your mind and want to cancel
the time you have set, simply turn the setting
knob anticlockwise. Then turn the selector
to 'Manual'.
When you are using the timer you can make
the clock show the time of day by turning the
selector knob to 'Manual'. The bell symbol
will stay on to remind you that the timer is
set. At the end of the timed period an alarm
will sound and the bell symbol will go out.
Switch off the alarm by turning the selector
knob to ' Clock' . Then turn to ' Manual' and
the time of day will show in the display.
9