Zanussi ZCG92496XA 사용자 설명서 - 페이지 13

{카테고리_이름} Zanussi ZCG92496XA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCG92496XA 29 페이지.

Put the shelf between the guide bars of the shelf

support. The front and back bars should be placed

upwards.

WARNING! The maximum weight

permitted on the oven shelf is 24 kg.

Avoid putting heavier food on the

shelf.

Tray:

Do not push the baking tray all the way

to the back wall of the cavity. This

prevents the heat from circulating

around the tray. The food may be

burnt, especially in the rear part of the

tray.

Push the tray or deep pan between the guide bars

of the shelf support. Make sure it does not touch

the back wall of the oven.

USING THE TURNSPIT

WARNING! Be careful when you use

the turnspit. The forks and the spit are

sharp. There is a risk of injury.

WARNING! Use oven gloves when

you remove the turnspit. The turnspit

and the grill are hot. There is a risk of

burns.

CAUTION! The maximum weight

permitted on the turnspit is 4.5 kg.

A. Support hook

B. Forks

C. Spit

D. Handle

The support hook is installed in the top

of the oven cavity.

You can leave the support hook in the

oven, when the turnspit is not active.

1. Open the oven door.

2. Put the turnspit handle into the spit.

3. Put the baking tray on the lowest shelf level.

4. Snap out one end of the support hook from the

oven ceiling A and let it hang on the other end.

5. Install the first fork on the spit, then put the

meat on the turnspit and install the second fork.

Make sure that the meat is in the middle of the

spit.