Zanussi ZCG94396XA 사용자 설명서 - 페이지 26

{카테고리_이름} Zanussi ZCG94396XA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCG94396XA 29 페이지.

WARNING! Put the mains plug

into the mains socket only if all

parts are back into their initial

position. There is a risk of injury.

4. Light the burner.

Refer to "Oven - Daily use" chapter.

5. Turn the knob for the oven functions on the

minimum position.

6. Remove the knob for the oven functions again.

7. Screw on slowly the bypass screw till the flame

becomes minimum and stable.

8. Put the knob for the oven functions back.

9. Set the maximum gas flow position on the knob

for the oven functions and let the oven heat for

at least 10 minutes.

10. Quickly turn the knob for the oven functions

from maximum to the minimum gas flow

position.

Control the flame. Make sure the flame does not go

out when you turn the knob to the minimum gas

flow position. There must be a small regular flame

on the oven burner crown. If the flame goes out

adjust the oven burner again.

GAS GRILL INJECTOR REPLACEMENT

1. Release the screws which keep the grill burner

in position A.

2. Release the burner injector with a 7 mm socket

spanner and replace it with a right one.

3. Assemble the burner in a reverse sequence.

Before you fix the screw, make sure that the

burner is pushed correctly to the back panel.

Test the grill injectors.

LEVELLING

1. Open the lid of the appliance and disassemble

it.

2. Disassemble the pan supports and all the

burner assemblies.

3. Tilt the cooker backwards 30 degrees.

4. With the help of a second person who

supports the cooker from falling, fold the front

feet into the holes in the plinth.

CAUTION! Remove all the

accessories from the oven.

CAUTION! The assembly should be

made by two people.

30°