Zanussi ZCM 700 X 지침 책자 - 페이지 28

{카테고리_이름} Zanussi ZCM 700 X에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCM 700 X 32 페이지. Zanussi instruction booklet mixed fuel cooker zcm 700 x

Fitting the Stability Bracket

(Not supplied)

If the cooker has to be installed with a flexible supply

pipe, it is necessary that a stability device is fitted.

If a stability bracket should be fitted by the installer,

these instructions should be read in conjunction with

the leaflet packed with the stability bracket.

1. Place the cooker in its intended position

and mark the cooker height.

2. Mark 165mm below the cooker height. This

is the position of the stability bracket.

3. Fix a large type of stability bracket (using

two of the provided five fixing holes) to

the rear wall (see the picture below).

4. Pull the cooker towards the rear wall as

shown in the diagram. The stability bracket

should then come into contact with the rear

panel of the cooker (see diagram).

Should the stability bracket currently installed not

allow the cooker to stand correctly, ask the installer

to replace it with the correct type.