Zanussi ZCV665MN 사용자 설명서 - 페이지 7

{카테고리_이름} Zanussi ZCV665MN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCV665MN 20 페이지. Cooker
Zanussi ZCV665MN에 대해서도 마찬가지입니다: 사용자 설명서 (24 페이지)

Zanussi ZCV665MN 사용자 설명서
Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Grill- / Roasting pan
To bake and roast or as pan to collect fat.

Before first use

WARNING!
Refer to Safety chapters.
Initial Cleaning
Remove all accessories from the appliance.
Refer to "Care and cleaning"
chapter.
1. Clean the appliance before first use.
2. Put the accessories back to their initial
position.
Setting the time
You must set the time before you operate the
oven.
When you connect the appliance to the
electrical supply or after a power cut, the
indicator for the Time of Day function flashes.

Hob - Daily use

WARNING!
Refer to Safety chapters.
Heat setting
Symbols
Off position
1 - 6
Heat settings
(1 - lowest heat setting, 6 - high-
est heat setting)
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process
is completed.
www.zanussi.com
Function
• Trivet
For roasting and grilling.
Use the trivet only with the Grill- /
roasting pan.
Press the
or
to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day.
To change the time, press
until the indicator for the Time of Day function
flashes.
Preheating
Preheat the empty appliance to burn off the
remaining grease.
Preheat the two ovens. Heat up one
oven at a time.
1. Set the maximum temperature.
2. Let the appliance operate for 1 hour.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow is sufficient.
Turn the knob to a necessary heat setting.
To complete the cooking process, turn the knob
to the off position.
Residual heat indicator
WARNING!
There is a risk of burns from residual
heat.
The indicator comes on when a cooking zone is
hot.
again and again
7