Zanussi ZCV69360WA 사용자 설명서 - 페이지 11
{카테고리_이름} Zanussi ZCV69360WA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZCV69360WA 32 페이지.
Zanussi ZCV69360WA에 대해서도 마찬가지입니다: 사용자 설명서 (33 페이지)
페이지 인쇄
1. Set the function
to 250ºC.
2. Let the oven operate for 1 hour.
3. Set the function
to 250ºC.
4. Let the oven operate for 15 minutes.
6. HOB - DAILY USE
WARNING!
Refer to Safety chapters.
6.1 Heat setting
Symbols
Function
Off position
1 - 6
Heat settings
Use the residual heat to decrease energy
consumption. Deactivate the cooking
zone approximately 5 - 10 minutes before
the cooking process is completed.
Turn the knob for the selected cooking zone
to a necessary heat setting.
To complete the cooking process, turn the
knob to the off position.
7. HOB - HINTS AND TIPS
WARNING!
Refer to Safety chapters.
7.1 Cookware
The cooking results depend on the cookware
material
• recommended: aluminium, copper
• not recommended:stainless steel, cast
iron, glass
. Set the temperature
. Set the temperature
5. Turn off the oven and let it cool down.
Accessories can become hotter than usual.
The oven can emit an odour and smoke.
Make sure that the airflow in the room is
sufficient.
6.2 Residual heat indicator
WARNING!
As long as the indicator is visible, there is
a risk of burns from residual heat.
The indicator appears when a cooking zone
is hot, but it does not function if mains power
is disconnected.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
The bottom of the cookware must be as
thick and flat as possible.
Ensure pan bases are clean and dry
before placing on the hob surface.
Do not use cookware on the ceramic hob
with bases with pronounced edges or
ridges, e.g. cast iron pans. These could
scratch or scour the hob surface
permanently.
ENGLISH
11