Zanussi ZKM6040 사용자 설명서 - 페이지 39

{카테고리_이름} Zanussi ZKM6040에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZKM6040 44 페이지. Range cookers
Zanussi ZKM6040에 대해서도 마찬가지입니다: 특징 및 기능 (9 페이지)

•

Ensure that the cover is securely fastened.

Note: House circuit

Earth leakage / continuity tests must be carried

out before the appliance is connected to the

mains supply and re-checked after fitting.

Connecting to gas supply

• This appliance is designed to be installed

with an appliance flexible connection only.

• Supply piping should not be less than R

Connection is made to the Rc ½ (½" B.S.P.)

female threaded entry pipe located just

below the hob level on the rear left hand side

of the appliance.

ONLY LIQUID SEALANTS TO BE USED

WHEN INLET GAS PIPE IS FITTED I.E.: DO

NOT USE P.T.F.E. SEALANT TAPE.

• Carry out a gas tightness test after

connecting to the gas supply.

• The gas bayonet connector must be fitted in

the shaded area indicated.

• Take into account that it must be possible to

pull the appliance forward sufficiently.

Ensure the hose does not become trapped

when pushing the appliance into position.

/8.

FLEXIBLE TUBING USED MUST COMPLY

WITH BS.669 CURRENT EDITION.

Fitting the stability chain

It is recommended that if the appliance is to be

installed with a flexible supply pipe, a stability

chain be fitted and is available from your

supplier (see Important Safety Requirements).

These instructions should be read in conjunction

with any leaflet packed with the stability chain.