3Com Switch 4500 Family 빠른 참조 매뉴얼 - 페이지 11

{카테고리_이름} 3Com Switch 4500 Family에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com Switch 4500 Family 17 페이지. Switch 4500 10/100 family
3Com Switch 4500 Family에 대해서도 마찬가지입니다: 데이터시트 (16 페이지), 제품 설명서 (13 페이지), 제품 설명서 (15 페이지), 데이터시트 (8 페이지), 데이터시트 (8 페이지), 데이터시트 (9 페이지)

페이지 인쇄
3Com Switch 4500 Family 빠른 참조 매뉴얼
Command
ssh user (username)
authentication-type
(authenticaltion type)
stp
stp bpdu-protection
stp mcheck
stp mode
stp pathcost-standard
stp priority
stp root primary
stp root secondary
stp timeout-factor
stp timer forward-delay
stp timer hello
stp timer max-age
super password level
sysname
system-guard
tcp timer fin-timeout
tcp timer syn-timeout
tcp window
tftp-server
udp-helper enable
udp-helper port
user-interface
vlan
voice vlan
voice vlan aging
voice vlan mac_address
voice vlan mode auto
voice vlan security enable
web set-package
xrn-fabric authentication-
mode
Table 5 Local-user View
[4500]local-user admin
Command
attribute
level
password password-control
aging
password-control length
Description
Define an authentication type for a designated user; either
password, RSA, or public key.
Enable Spanning Tree Protocol
Enable BPDU protection
Force the port to work in RSTP mode
Configure the RSTP running mode
Standard to be used for calculating the default Path Cost
Configure the bridge priority of the Switch
Configure the current switch as the primary root of a
spanning tree
Configure the current switch as a secondary root of a
specified spanning tree
Configure multiple of hello time
Configure the time of forward delay
Configure hello time for Switch
Configure the max age of the Switch for judging stp packets
Configure a password for changing the user from a lower
user level to a higher user level
Specify the name of the Switch
Configure the System-guard feature
Configure the TCP finwait timer
Configure the TCP synwait timer
Configure size of transmission and receiving buffers of
connection-oriented socket
Configure the TFTP server
Enable UDP Helper function
Configure the UDP port with relay function
Configure the user terminal interface and enter the view (See
Table 6, "User-interface view," on page
Configure VLAN and enter VLAN view (See
View," on page
14)
Globally enable the Voice VLAN features of one VLAN
Configure the aging time of Voice VLAN
Set the MAC address that the Voice VLAN can control
Set the Voice VLAN in auto mode
Enable the Voice VLAN security mode
Change the default web source file name
Configure authentication mode of the fabric
Description
Configure some attributes for specified local user
Configure user priority level
Specify password aging
Specify password length
11
Web Command
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Device -> Spanning Tree
Administration -> SNMP ->
Setup
12)
Table 13, "VLAN
Device -> VLAN
Device -> Voice VLAN
Device -> Voice VLAN
Device -> Voice VLAN
Device -> Voice VLAN
Device -> Voice VLAN
Device->XRN Fabric
Web Command
Administration -> System
Access
Administration -> System
Access
Administration -> System
Access