Clarke HUNTER 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke HUNTER에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke HUNTER 15 페이지. Air compressor

ROUTINE MAINTENANCE

IMPORTANT: Before carrying out any of this service work, always disconnect the

machine from the mains supply, drain the air receiver and, if necessary, allow the

machine to cool down before starting work.

Daily

Before use, always open the drain valve to ensure that any condensate, which

may have accumulated, is drained off.

Before use, make sure the cylinder head bolts are securely tightened.

Monthly

It is important to keep the Compressor clean, with the help of a small soft brush

and vacuum cleaner. In particular, the air intake

filter should be inspected at least MONTHLY, and

more often in dusty conditions, so that it is always

kept free of any dirt particles, which if not

cleaned away will affect the performance of

the machine.

To clean the air intake filter, unscrew the cover

and carefully prise out the element shown in

Fig.2. Clean the inner housing using a cloth or

brush.

If the filter is clogged or badly blackened, it should

be replaced. It is not possible to wash the filter

Check the oil level, which should be midway across the

sight glass, as shown in Fig.3.

Remove the breather and top up, using a funnel, with Clarke

compressor oil (SAE40).

Drain and replace the oil after 6 months.

When replacing the breather, unscrew the cap

and check the filter for cleanliness as shown in

Fig.4. if it is badly contaminated, it should be

replaced, otherwise, it may be washed gently in

soapy water, rinsed thoroughly and dried before

replacing

Fig.2

Fig.3

Fig. 4