Clarke PE11C50 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke PE11C50에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PE11C50 17 페이지. Air compressor electric motor driven
Clarke PE11C50에 대해서도 마찬가지입니다: 운영 및 유지 관리 지침 (16 페이지)

페이지 인쇄

OUTLET PRESSURE ADJUSTMENTS

PORTABLE COMPRESSORS

1. Pressure Adjusting Knob

2. Outlet Taps

3. Pressure Gauge

TO ADJUST OUTLET PRESSURE:

To increase pressure - turn knob (1)

clockwise. To decrease pressure - turn

knob (1) anticlockwise.

Outlet taps - slide knurled section (2) away

from body to open, push towards body to

close.

NOTE: Pressure Gauge (3). Pressure shown will differ by approximately 1

bar depending on whether the outlets are open/closed.

STATIONARY COMPRESSORS

These machines are not supplied with the facility to adjust outlet pressure. A

comprehensive range of airline accessories is available from your local

CLARKE stockist.

OVERLOAD BUTTON (SINGLE PHASE ONLY)

The electric motor is fitted with an automatic

overload detector which will stop the motor if an

overload is detected.

If this happens,

1. Switch off at the pressure switch (Push knob

down or turn switch).

• Allow the compressor to cool down for 5-10

minutes.

2. Press the Reset button shown on the right.

3. Switch on pressure switch (lift knob or twist switch).

If the overload trips repeatedly, it may indicate a fault with the compressor, in

this case you should contact the Clarke service department.

OTHER PRODUCTS WITHIN OUR RANGE In addition to Air Compressors from 3–40

cfm, we offer a vast range of air tools and airline equipment. Please ask your

local dealer for details of our range or a copy of our Power Products Catalogue

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Illustrative

purposes

only