Clarke PED14A100 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke PED14A100에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PED14A100 17 페이지. 3hp direct drive compressor

REMOVING TOOLS FROM THE AIR HOSE

WARNING: ALWAYS SET THE PRESSURE REGULATOR TO ZERO BEFORE

ATTEMPTING TO REMOVE OR REPLACE A TOOL.

1. Press the red On/Off switch down

to the OFF position to stop the

compressor.

2. Set the pressure regulator to its

lowest setting, i.e. fully

anticlockwise (if fitted).•

3. Trigger the equipment (spraygun,

air tool etc), to release air from the

air hose before disconnecting the

hose from the machine.

This compressor is equipped with a

thermal overload device, which

operates as a safety device to

protect the motor.

When the motor overheats for any

reason, the overload cutout

automatically cuts the power thereby

preventing damage to the motor.

Wait around 5 minutes for the motor

to cool and press the reset button.

If you restart the compressor and the overload cutout activates again, switch

off the compressor, remove the plug from the mains and have your

compressor checked by a qualified service agent.