Directed Viper 220 MAX 설치 매뉴얼 - 페이지 16

{카테고리_이름} Directed Viper 220 MAX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Viper 220 MAX 18 페이지. Recreational vehicle security system

The system can be programmed to count the number presses of the Valet®/Program button before disarming the

security system. the factory default setting is one pulse. The unit can be set for two to five pulse using the two-

chirps setting to select the pulse count.

2-6 BYPASS NOTIFICATION ON/OFF

When programmed ON, any active zone input to the system during arming will generate a bypass notification

chirp. When programmed OFF, no bypass notification chirps will be generated if any zone is open during arming.

2-9 CHANNEL 3 VALIDITY

CHANNEL 3 : VALIDITY / LATCHED / LATCHED RESET WITH IGNITION / 30 SECONDS TIMED / SECOND UNLOCK

OUTPUT . Channel 3 can be programmed for these output configurations. The unit is set to the default validity

output. To change the configuration, use the two chirps setting to toggle to the different configurations. The

unit must be programmed as Latched to operate the optional 508 D Micro-wave perimeter detector.

Once a feature is programmed

■ Other features can be programmed within the same menu.

■ Another menu can be selected.

■ The learn routine can be exited if programming is completed.

To access another feature in the same menu :

1. Press and release the Valet®/Program switch the number of times necessary to advance from the feature

you just programmed to the next one you want to program.

2. Then press the Valet®/Program switch once more and hold it.

For example, if you just programmed the third feature in the menu and you would like to program the seventh

feature in the menu, you would press and release the Valet/Program switch four times and then press it once

more and HOLD it. The siren would chirp seven times to confirm access to the seventh feature.

To select another menu:

1. Press and HOLD the Valet/Program switch.

2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating which

menu has been accessed.