Alecto DBX-82 사용자 설명서 - 페이지 7

{카테고리_이름} Alecto DBX-82에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Alecto DBX-82 17 페이지.

CONNECTION CONTROL:

Every 30 seconds, you can send three short beep tones from the baby unit to the

parent unit. This enables the connection to be checked every 30 seconds. This

function can be switched on or turned off as follows:

Baby unit only:

1. Push 3x on the button

2. Push on the

button to turn this function [OFF] in the display.

3. Push on the

MONITORING: (forced listening)

Baby unit:

You can set the baby unit so that it broadcasts every 5 minutes for 5 seconds,

even when the baby unit does not detect sound.

1. Push 4x on the

2. Push the

button to turn this function ([ON] in the display) or press the

button to turn this function [OFF] in the display.

3. Push on the

Parent unit:

You can temporarily or permanently disable the noise reduction of the parent unit

so you can still hear the baby unit when a weak signal is received.

- Push on the

button, the noise reduction will be switched on again.

- If you push and hold the

short beep sound which will indicate that the continuous noise reduction has been

turned off. If you release the

time. Push the

button to turn this function [ON] in the display or push on the

button to set the selected function.

button; the word [AUTO MON] will light up.

button to set the selected function.

button to switch off the noise reduction, when you release this

button for more than 3 seconds, you will hear a

button to turn the noise reduction on again.

; the word [BEEP] will light up.

button you can continue to listen for a short