Directed Directechs DB3 설치 매뉴얼 - 페이지 17

{카테고리_이름} Directed Directechs DB3에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Directechs DB3 19 페이지. Smart key for 2013 toyota highlander
Directed Directechs DB3에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 매뉴얼 (6 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (10 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (17 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (18 페이지)

페이지 인쇄
Directed Directechs DB3 설치 매뉴얼
Quick Reference Guide (customer copy)
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are
3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly
on your factory remote.
Vehicle takeover with Get In and Go
Close the vehicle doors, hood and trunk, then press the
1
Remote Start button on the transmitter to start the vehicle.*
Press the Unlock button on the factory or aftermarket
2
remote.*
Complete the following steps within 45 seconds or the vehicle will shut down.
Enter the vehicle, while making sure the factory remote is
3
inside with you.
Important: Follow the option that has been checked off
by your technician:
Depress the brake pedal for a minimum of 3 seconds
4
then put the car in gear and drive off.
OR
Press the PTS button twice. Depress the brake pedal
for a minimum of 3 seconds then put the car in gear and
drive off.
* Icon and remote appearance may differ depending on the model purchased.
17
403.KIA10 1.10 2023 Kia Carnival (Smart Key)
©2023 Directed. All rights
Get In and Go
Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start
(PTS) equipped vehicle, once it has been remote started.
Typically, users would have to remote start their vehicle, then get inside and press the PTS button
to perform a takeover. There is therefore a physical action required to drive away. With Get In
and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to
do is put the gear in drive and drive off.
Pit stop/idle mode
Stop the vehicle in a safe parking spot
1
and put the gear in Park (P).
Press Remote
Start button*
Important: Follow the option that has
been checked off by your technician:
Press Unlock on
either remote*
on the transmitter.*
The parking lights will flash once to indicate
2
the vehicle is now in Pit Stop Mode.
14:36
Enter vehicle
with remote
the transmitter and then press the PTS
button once.*
Ready to
drive off
The parking lights will flash once to indicate
the vehicle is now in Pit Stop Mode.
OR
Exit the vehicle with the factory remote in
hand (it is safe to leave the engine running).
Ready to
drive off
3
Note: We recommend you always lock the doors
of your vehicle when leaving it unattended.
* Icon and remote appearance may differ depending on the model purchased.
14:36
Press the Remote Start button
14:36
OR
Press the Remote Start button on
Put
gear in
Park
14
&
Parking lights flash x1
Press Remote
Start button*
OR
&
&
Parking lights flash x1
Press Remote
Start button*
14:36
Exit vehicle
with remote