Clarke SPYDER 7 운영 및 유지보수 지침 매뉴얼 - 페이지 8

{카테고리_이름} Clarke SPYDER 7에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke SPYDER 7 10 페이지. Oil free air compressor

particles, which, if not cleaned away, will affect

the performance of the machine.

To clean the air intake filter, carefully prise out

the sponge element shown in fig.2. Clean the

sponge and the housing using a brush or clean

lint free cloth.

If necessary, the sponge filter may be gently

washed in warm soapy water, rinsed and

allowed to dry thoroughly before refitting.

Every 500 hours of operation or every 6 months

•

Clean all the external parts of the compressor.

(This cleaning makes the cooling process more efficient and prolongs the

life of the machine).

•

Examine the non-return valve and renew

if necessary (fig. 3)

(Ref: H Fig. 1, Item 18 page 15, and Item

10, page 16,)

•

In the event of an air leak follow the procedure below:

• Load compressor to maximum pressure

• Unplug the compressor

• With a brush and soapy water wet all 'screwed' air connections

• Any leaks will show through the formation of air bubbles.

•

Replace the piston (See your Clarke dealer)

WARNING

NEVER UNSCREW A CONNECTION WHILST THE AIR RECEIVER IS UNDER PRESSURE.

ALWAYS MAKE CERTAIN THAT THE TANK HAS FIRST BEEN EMPTIED.

Fig. 2

- 8 -

PARTS DIAGRAM - PUMP

SPYDER 3 AND SPYDER 7

Fig. 3

- 13 -