Directed XpressKit DBALL 매뉴얼 - 페이지 10

{카테고리_이름} Directed XpressKit DBALL에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed XpressKit DBALL 14 페이지. Ford5 remote start ready (rsr) installation
Directed XpressKit DBALL에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (16 페이지), 매뉴얼 (19 페이지)

페이지 인쇄

Platform: DBALL/DBALL2

Firmware: FORD5 Range Extender Ready (RXT) Installation

LED

Description

RXT Codes

Flashes green

Start command received.

x 7

Flashes green

Stop command received.

x 8

Flashes red

Start fail.

x 5

Flashes red

Stop fail.

x 6

RFTD disabled.

Flashes red

x 7

Flashes red

OEM RS disabled.

x 8

Troubleshooting

If the bypass module fails to flash, it means the module did not

receive the signal. If using XL202, make sure the proper cable is

used. When using SmartStart make sure SmartStart is configured in

D2D

RXT start command was not executed. The module received the

command, but the car did not perform the action.

OEM Remote Start Activation was attempted while the RFTD feature

is disabled. It is activated from the Web automatically when using the

RXT flash tool or can be done manually. Refer to the Feature

Programming section for more information.

RXT start not possible when the OEM system is disabled. Refer to

the owner documentation to activate it.

Rev.: 20160317

Page 10