Directed Xpresskit DBALL2 설치 매뉴얼 - 페이지 18

{카테고리_이름} Directed Xpresskit DBALL2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Xpresskit DBALL2 19 페이지. Ford5 remote start ready (rsr) installation
Directed Xpresskit DBALL2에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (18 페이지), 매뉴얼 (14 페이지), 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (15 페이지), 설치 및 빠른 참조 매뉴얼 (16 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (16 페이지), 매뉴얼 (19 페이지)

Quick Reference Guide

DBALL2-HYUNDAI4 Remote Start Ready (RSR) Installation

Engine Idle Protection System (EIPS)

Vehicles equipped with RFID-type Push-to-Start ignition systems work by detecting

a proximity key in the vehicle. They will run indefinitely if the key is removed, which

could potentially lead users to exiting the vehicle while the engine is still running

and the car is left idling on its own in a garage or a confined space.

To mitigate risk, we have designed a feature that is now available on the DBALL. It

will detect the presence of the RFID fob in the vehicle, through the CAN bus. If left

idling for more than the pre-defined runtime (i.e. 1 to 5 minutes) without detecting

the fob, DBALL will send a signal to the vehicle in order to shut off the engine.

EIPS (Engine Idle Protection System) will:

Notify the user about the idling engine by sounding the horn with a series of short

beeps.

Shut down the engine after a pre-defined period of time (i.e. 1 to 5 minutes).

EIPS is configured using XpressVIP. The following window is displayed whenever

a DBALL module is flashed.

If the engine fails to shut down due to some malfunction, EIPS will go into alarm

mode and will notify the user by all means possible (e.g. horn or siren).

Activating/deactivating EIPS:

To activate EIPS, remove all keys from the vehicle and close all doors while the

engine is running.

To deactivate EIPS, do one of the following actions:

Open one of the doors.

Remote start the vehicle.

Turn the engine off.

Drive the vehicle.*

* The EIPS feature is disabled if the vehicle is in motion so there is no risk that the

vehicle will shut off while driving, regardless of the fob being present in the vehicle

or not.

Notes