Directed Xpresskit DBALL2 매뉴얼 - 페이지 12

{카테고리_이름} Directed Xpresskit DBALL2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Xpresskit DBALL2 14 페이지. Ford5 remote start ready (rsr) installation
Directed Xpresskit DBALL2에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (13 페이지), 설치 매뉴얼 (14 페이지), 설치 매뉴얼 (19 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (15 페이지), 설치 및 빠른 참조 매뉴얼 (16 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (16 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (16 페이지), 매뉴얼 (19 페이지)

페이지 인쇄

Quick Reference Guide

DBALL/DBALL2-FORD5 Range Extender Ready (RXT) Installation

Vehicle Takeover

Press the remote start button on the transmitter to

start the vehicle.*

Press the Unlock button on the factory

or aftermarket remote.*

Enter the vehicle, while making sure the

factory remote is inside with you. The

Push-to-Start (PTS) button will start

to flash.

Important: Do NOT press the brake pedal.

Press the PTS button twice to turn the

ignition ON.

Press the brake pedal, put the car

in gear and drive off.

* Your aftermarket remote may differ from the model shown in the illustrations.

Press

remote start

button*

Press Unlock

button on

either remote*

ENGINE

START

STOP

Enter vehicle

Flashes

with Smart Key

ENGINE

PUSH

START

STOP

Do NOT press

brake pedal

Ready to

drive off

Pit Stop Mode

The Pit Stop Mode feature is practical when you need to stop and run an errand,

but wish to keep the engine running.

Stop the vehicle in a safe parking spot

and put the gear in Park (P).

Press the button to remote start the vehicle.*

The PTS button will flash once to

indicate the vehicle is now in Pit Stop

Mode.

It is now safe to leave the engine running and exit the

vehicle with the factory remote in hand.

Note: We recommend that you always lock the doors

of your vehicle when leaving it unattended.

* Your aftermarket remote may differ from the model shown in the illustrations.

Stop & put vehicle in Park (P)

Press

ENGINE

START

remote start

STOP

button*

Flashes

Exit vehicle with

Smart Key