Blackberry Radar H2 설치 매뉴얼 - 페이지 16

{카테고리_이름} Blackberry Radar H2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackberry Radar H2 28 페이지. Dry van, insulated trailers roll-up doors
Blackberry Radar H2에 대해서도 마찬가지입니다: 설치 매뉴얼 (33 페이지), 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (25 페이지), 설치 매뉴얼 (32 페이지), 설치 매뉴얼 (30 페이지), 설치 매뉴얼 (33 페이지), 설치 매뉴얼 (34 페이지), 설치 매뉴얼 (35 페이지), 사용 설명서 (33 페이지), 설치 매뉴얼 (32 페이지), 설치 매뉴얼 (26 페이지), 설치 매뉴얼 (25 페이지)

페이지 인쇄
Blackberry Radar H2 설치 매뉴얼
BLACKBERRY RADAR H2 ITC100-1, ITC100-2, ITF100-1 INSTALLATION GUIDE
When looking for an installation location, if you are considering installation on a frame rail
within an overhang, it is recommended to choose an installation location with a minimum
clearance of 1/4" (6 mm) above and below the module. Maintaining this minimum
clearance improves antenna performance. In some cases, as when installing on narrow
width "C-channel" frame rails, it may be beneficial to mount the module on the opposite
side of the frame rail to achieve the recommended clearance.
Low Clearance
Not Recommended
1. As indicated in Section 3.3 of this guide, record the module identifier and the asset
identifier the module will be paired with. For your convenience, you may quickly create a
record of the module and asset identifier pairings by removing the partially attached label
from the inner housing of the module and placing it on the installation worksheet, next to
the asset that will be tracked by this module.
FLATBED AND HEAVY EQUIPMENT
Good Clearance
Recommended
16
Outside Installation
Recommended