Blackberry RADAR-M ITA100-1 설치 매뉴얼 - 페이지 16

{카테고리_이름} Blackberry RADAR-M ITA100-1에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blackberry RADAR-M ITA100-1 39 페이지. Container, dry van, insulated trailers barn doors
Blackberry RADAR-M ITA100-1에 대해서도 마찬가지입니다: 설치 매뉴얼 (27 페이지), 설치 매뉴얼 (36 페이지)

페이지 인쇄

BLACKBERRY RADAR ITA100-1 CHASSIS BRACKET INSTALLATION GUIDE

4. Remove the adhesive liner from the rear of the external module.

5. Remove the partially attached label from the top right corner of the external module

and place it on the outer surface of the external module.

6. Guide the cable connector and the cable through the middle hole of the chassis

bracket. Insert the screw bosses into the remaining two holes. Confirm the top of the

BlackBerry logo on the external module is facing the overhang at the top of the

bracket. The logo should appear as shown.