Clarke 07127A 운영자 매뉴얼 - 페이지 6

{카테고리_이름} Clarke 07127A에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 07127A 20 페이지. American b-2+ dc 7" edger
Clarke 07127A에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

페이지 인쇄

Machine Set-up

This sanding machine is designed to be operated with a

remote vacuum dust collection sytem or with the included

dust bag.

Preparing Remote Vacuum Dust Collection Sytems

To prepare the machine for remote vacuum dust collection

systems that have a 2" hose end, follow this procedure:

1. Install 2" hose end directly over the exhaust tube.

2. The exhaust tube can be rotated for optimum conve-

nience.

To prepare the machine for remote vacuum dust collection

systems that have a 1 ½" hose end, follow this procedure:

1. Install the 2" x 1½ house end adaptor (Part No.

30563A) over the exhaust tube.

2. Insert 1 1/2" hose end into the adaptor.

NOTE: Start the remote vacuum collection system

before operation.

Preparing to use the included dust bag

To prepare the machine for use with the included dust bag

(Part No. 53544A), follow this procedure:

1. Press the bag opening over the exhaust tube until the

internal rib of the bag opening engages into the annular

groove on the exhaust tube. This is best done by

pressing on the back of the bag opening with the palm

of your hand.

2. The exhaust tube can be rotated for optimum conve-

nience.

3. To remove the dust bag from the exhaust tube, pry up

the end of the bag opening to partially release the

internal rib from the groove, then pull.

4. To empty the dust bag, unzip the disposal flap and

force contents out by inverting the bag.

NOTE: For best results, empty frequently. Follow all

warnings posted in this manual and on the dust bag.

Page 6

Clarke American Sanders American B-2 Operator's Manual