Clarke 07128A 사용자 설명서 - 페이지 5

{카테고리_이름} Clarke 07128A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 07128A 8 페이지. American b-2+ dc 7" edger
Clarke 07128A에 대해서도 마찬가지입니다: 운영자 매뉴얼 (20 페이지)

페이지 인쇄
Clarke 07128A 사용자 설명서
Reassembly
1-Press uper bearing (71) on armature using the inner race only
2-Press bearing (76) and seal (75) in lower housing (8)
3-Press armature into the lower housing assembly
4-Reinstall pinion gear
5-Reinstall dust baffles
6-Reinstall the field housing assembly
Assembly Hints
Pinion and drive gears should always be replaced as sets
It is recommended that the upper and lower armature bearings be replace when installing a new armature
The dust baffles can be retained with super glue to keep them in place while reinstalling the field housing
assembly.
Fig. 28
Fig. 29
Fig. 30
56043143
Page 5