Clarke 3120193 운영 및 유지 관리 지침 - 페이지 5

{카테고리_이름} Clarke 3120193에 대한 운영 및 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 3120193 17 페이지. Multi-sander kit

USE OF THE SANDING DISCS

1. Inspect any sanding disc before use. Do not use if split or broken.

2. Avoid contact with the moving sanding disc and wear gloves to protect

the hands.

3. Never run the tool unless the abrasive pad is applied to the workpiece.

4. Beware of potentially explosive atmospheres being caused by dust / fumes

resulting from sanding and used dust extraction systems where possible.

5. Always wear a face mask when using the sander as protection from

airbourne particles of sanded material. Avoid disturbing existing dust and

minimise the scattering of dust in the worplace environment. Take steps to

control the dust at the point of emission.

TRANSPORTATION AND STORAGE

1. Never carry the tool by the air supply hose or with your finger on the trigger.

2. When not in use the tool should be disconnected from the air supply and

stored in a dry place out of the reach of children.

3. Avoid storing the tool in environments where the temperature is below 0

Model Number

Dimensions (L x W x H)

Weight (tool only)

Air Inlet Size

Operating Pressure

Measured Air Consumption

No Load Speed

Sound Pressure Level (LpA dB)

Sound Power Level (LwA dB)

Vibration Levels

Please note that the details and specifications contained here are correct at

the time of going to print. However CLARKE International reserve the right to

change specifications at any time without prior notice.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

CAT176

155 x 38 x 74 mm

0.7 kg

1/4"BSP (female)

90 psi (6.2 bar)

12 cfm maximum

17,000 rpm @ 90psi

88 dB(A)

99 dB(A)

<2.9 m/s