Clarke 6500403 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke 6500403에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6500403 15 페이지. Belt/disc sander

Electrical Connections

Connect the mains lead to a standard, 230 volt (50Hz) electrical supply through a

fused good quality 13 amp BS 1363 plug, or a suitable fused isolator switch.

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow

As the colours of the flexible cord of this appliance may not correspond with the

coloured markings identifying terminals in your plug, proceed as follows:

•

Connect GREEN & YELLOW cord to terminal marked with a letter "E" or Earth

symbol "

" or coloured GREEN or GREEN & YELLOW.

•

Connect BROWN cord to terminal marked letter "L" or coloured RED.

•

Connect BLUE cord to terminal marked letter "N" or coloured BLACK.

We strongly recommend that this unit is fitted with a Residual Current Device (RCD).

FUSE RATING

The fuse in the plug for this appliance must be rated at 5 amps and any

replacement must be ASTA approved to BS 1362.

IMPORTANT NOTICE

If this appliance is fitted with a plug which is moulded on to the electric cable (i.e.

non rewireable) please note:

This plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted in a socket outlet.

Never use the plug without the fuse cover fitted.

Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

Replacement fuse covers can be obtained from your local dealer, or an

electrical stockist.

Earth

Blue

Neutral

Brown

Live