Aft PRO-28U 사용자 설명서 - 페이지 7
{카테고리_이름} Aft PRO-28U에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aft PRO-28U 10 페이지. Aft pro-28u card readers: user guide
페이지 인쇄
Therefore, we shall have:
Red wire goes to pin 1
White wire goes to pin 2
Green wire goes to pin 3
Black wire goes to pin 4
Comparing the default wire setting on the Internal USB cable, no wire reassignment is
necessary. We can plug in the black pin connector of Internal USB cable to the USB
header directly, with red wire goes to pin 1 or 6.
Please note that your motherboard USB header pin assignment could be different from
the example above. If you need to reassign wires on Internal USB cable, please
follow the procedure below:
(1) Determine which wires you need to remove from the
black pin connectors first by referring to your motherboard
USB header pin layout.
(2) Using a needle or push pin to flip up the tiny plastic tab
and pull the wire out from the connector. Please take caution
on this step as excessive force on flipping the tab may cause
the tab to break.
(3) Repeat above step for each wire that requires changing.
(4) Insert the wire pin back into the correct slot and press the
tiny plastic tab down will hold the wire in its position.
Red wire goes to pin 6
or
White wire goes to pin 7
Green wire goes to pin 8
Black wire goes to pin 9
6