Clarke 6500490 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke 6500490에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6500490 13 페이지. Buffer/polisher

ELECTRICAL CONNECTIONS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY

BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,

for connection to a standard, domestic electrical supply. Should the plug

need changing, make sure that a plug of identical specification is used.

WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:

BLUE = NEUTRAL

If the colours of the wires in the power cable do not correspond with the

markings on the terminals of your plug, proceed as follows.

• Connect the blue wire

to the terminal which

is marked N.

• Connect the brown

wire to the terminal

which is marked L.

• Connect the yellow

and green wire to the

terminal which is

marked E or

• See the specification

table for the correct

fuse size.

AN APPROVED RESIDUAL CURRENT DEVICE (RCD) WHICH HAS A TRIPPING

CURRENT OF LESS THAN 30MA MUST BE USED.

If you are not sure, consult a qualified electrician. DO NOT try to do any

repairs.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

BROWN = LIVE

Plug must be BS1363/A approved.

Earth

(Green and

Yellow)

Neutral

(Blue)

YELLOW AND GREEN = EARTH

make sure that the outer sheath of

the cable is firmly held by the clamp

Live

(Brown)