Clarke CAT80 운영 및 유지보수 지침 매뉴얼 - 페이지 5
{카테고리_이름} Clarke CAT80에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CAT80 16 페이지. 6” dual-action sander
페이지 인쇄
•
The tool will be left unattended.
•
Moving to another work area.
12 Never use the tool if it is defective or operating abnormally.
13. The tool should be serviced as required by your CLARKE dealer.
14. Avoid damaging the tool for example by applying excessive force.
15. ALWAYS maintain the tool with care. Keep it clean for best and safest
performance.
16. ALWAYS ensure the workpiece is firmly secured leaving both hands free to
control the tool.
17. ALWAYS ensure the tool has stopped before putting it down after use.
18. ALWAYS ensure that any attachments are correctly fastened before
connecting the tool to the power supply.
19. Quick change air-line couplings should not be located at the tool. They
add weight and could fail due to vibration.
20. DO NOT force or misuse the tool. It will do a better and safer job operating
at the rate for which it was designed.
21. Do not remove any labels. damaged labels should be replaced.
22. This tool vibrates during use. Vibration may be harmful to your hands or
arms. Stop using the tool if discomfort, a tingling feeling or pain occurs and
seek medical advice before resuming use.
TRANSPORTATION
1. Never carry the tool by the air supply hose.
2. Never carry the tool with your finger on the trigger.
STORAGE
1. When not in use the tool must be disconnected from the air supply and
stored in a dry place out of the reach of children (preferably in a locked
cabinet).
2. Avoid storage in environments where the temperature is below 0
Parts & Service: 020 8988 7400/E-mail: [email protected] or [email protected]
5
o
C.