Aleko ARVAW010 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} Aleko ARVAW010에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aleko ARVAW010 8 페이지. Multi-functional rv/patioawning
페이지 인쇄Imperial system measurement
Awning width(A)
REMAKE:
A,represent awning width.
Please check
above measurement sheet carefully, and calculate the correct installation
position accordingly.
step 1
Find out the awning brackets(2pcs bottom brackets + 2pcs upper brackets which
already fixed on the arm) and two arms. see package components pic. 5 and 6.
step 2
Drill the holes according to your marked positions.
(You may check again the right distance of the upper and bottom brackets)
ATTENTION
Please insure all brackets positions are free stable and DO NOT overlap with other
parts of the caravan side wall (Eg.Windows, doors or others).
Fix the bottom
M6x50
brackets with M10
screws.
ALEKO
5.12
69.90
M6x50
Fix the upper
brackets with M10
screws.
The fabric lock rail is
between two upper
brackets,but keep
them in the same
Φ4.2x35
height position.
65mm
Φ4.2x13.5
Find the self tapping
screws then fix the
fabric on each side of
fabric lock rail, in case
of fabric slide out when
operating the awning.
Install the LED strip
There is a groove for Led Strip which is under
the fabric groove on the fabric lock rail. See
pic You can slid your LED strip into it if you
have.
(But the Led strip is not our standard
accessories.if you need,please kindly contact
with our salesman to order it)
Please insure the arms are vertical to the
ground and parallel to each other !
Fabric lock rail
Led strip groove