Aleko HTIO2BLD 조립 설명서 - 페이지 7

{카테고리_이름} Aleko HTIO2BLD에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aleko HTIO2BLD 14 페이지. Inflatable spa
Aleko HTIO2BLD에 대해서도 마찬가지입니다: 조립 설명서 (14 페이지)

ASSEMBLY

1. Unfold the spa from the packaging. Spread the spa on the Ground Sheet (Part h)

provided.Make sure that the surrounding sharp objects are cleared.

2. Open the air outlet on the spa. Screw one end of the inflation hose into it (Fig. 2).

3. Open the air inlet valve on the spa. Connect the other end of inflation hose into the air inlet valve (Fig. 3).

Fig. 4

5. Remove the inflation hose and screw the valve tight.

6. Remove the inflation hose from the air outlet and screw the valve cap tight.

Figure 1

Fig. 2

4. Inflate the spa tub by pressing the BUBBLE button. When the spa is

properly inflated, press the BUBBLE button to shut off the bubbles.

Attention : Do not overinflate.

Fig. 3