Clarke COS210 운영 및 유지보수 지침 매뉴얼 - 페이지 7

{카테고리_이름} Clarke COS210에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke COS210 13 페이지. Orbital sander

BEFORE USE

The sander is supplied with the following items:

• 3 x P60 grit hook and loop sanding sheets

• 3 x P120 grit hook and loop sanding sheets

• 3 x P240 grit hook and loop sanding sheets

• Dust collection box/filter assembly

WARNING: HARMFUL OR TOXIC DUST MAY BE PRODUCED WHEN

SANDING LEAD PAINTED SURFACES, WOODS OR METAL. CONTACT WITH,

OR INHALATION OF THESE DUSTS CAN ENDANGER THE HEALTH OF THE

OPERATOR OR BYSTANDERS. CERTAIN DUSTS LIKE OAK AND BEECH ARE

CONSIDERED TO BE CANCEROUS IN CONJUNCTION WITH ADDITIVES IN

WOOD TREATMENTS (CHROMATE, WOOD PRESERVATIVES). ASBESTOS-

CONTAINING MATERIALS MAY ONLY BE HANDLED BY EXPERTS.

WARNING: - USE A DUST EXTRACTION DEVICE OR A VACUUM CLEANER.

WARNING: - WORK IN A WELL VENTILATED ROOM. - THE USE OF A DUST

MASK FILTER CLASS P2 IS RECOMMENDED. - OBSERVE LOCAL

REGULATIONS REGARDING THE HANDLING OF CERTAIN MATERIALS.

FITTING THE DUST FILTER

1. Attach the dust filter by pushing

the filter onto the rear of the

sander as far as it will go and then

twisting clockwise until it locks into

place.

• The filter housing has lugs to

align and secure it. Note their

position matches those on the

sander body before assembly.

NOTE: The user should still wear a

face mask to prevent the inhalation of dust particles.

NOTE: Due to the nature of the sander some of the dust produced will be

forced into the surrounding atmosphere and will not be collected.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]