Clarke CP150 운영 및 유지보수 매뉴얼 - 페이지 11
{카테고리_이름} Clarke CP150에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CP150 17 페이지. 150mm (6”) orbital sander/polisher
페이지 인쇄
FAULTFINDING
Problem
Tool will not
operate.
Motor runs but pad
does not rotate.
Heavy internal
sparking.
Motor becomes
hot.
Excessive vibration.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Possible Cause
No power supply.
Faulty switch.
Fuse blown.
Faulty motor.
Drive gear broken.
Faulty motor.
Unduly heavy use.
Air vents have become
blocked.
Low supply voltage.
Disc not mounted
correctly.
Machine bearings worn.
11
Remedy
Check supply and
rectify as necessary.
Consult your Clarke dealer.
Replace fuse as on page
6.
Consult your Clarke dealer.
Consult your Clarke dealer.
Consult your Clarke dealer.
Reduce the force applied
to the machine. Let the
machine do the work.
Clean out the air vents
using compressed air or
clean with a dry cloth. Use
PPE when working with
compressed air.
Ensure supply voltage is
correct. If an extension
cable is used, ensure it is of
the correct rating and is
fully unwound.
Check and rectify.
Consult your Clarke dealer.