Clarke CP150 운영 및 유지보수 매뉴얼 - 페이지 4

{카테고리_이름} Clarke CP150에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CP150 17 페이지. 150mm (6”) orbital sander/polisher

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

2. Use personal protective equipment. Always wear eye and ear protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat,

or hearing protection used for appropriate conditions will reduce personal

injuries.

3. Prevent unintentional starting. Ensure the switch is in the off position before

connecting to power source, picking up or carrying the tool. Carrying

power tools with your finger on the switch or energising power tools that

have the switch on invites accidents.

4. Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

5. Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

7. If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

8. Hold the power tool by insulated gripping surfaces, when performing an

operation where the fastener may contact hidden wiring or its own cord.

Fasteners contacting a "Live" wire may make exposed metal parts of the

power tool "Live" and could give the operator an electric shock.

POWER TOOL USE AND CARE

1. Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the

rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]