ACOPOWER HY-PWM20AW 사용자 설명서 - 페이지 4
{카테고리_이름} ACOPOWER HY-PWM20AW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACOPOWER HY-PWM20AW 8 페이지. Solar charge controller input: dc12v solar panel (max.25v) output: dc12v, 10a / 15a / 20a input: dc12/24v solar panel (max.52v) output: dc12/24v, 10a / 15a / 20a
페이지 인쇄
The Solar Controller has 4 terminals which are clearly marked 'Solar' and 'Battery'.
The cable connection method is flexible and easy.
Use the string wires, directly secure the input and output wires into the terminal holes of the solar
controller, screw tightly the wires to the "Solar" terminal to the Solar Panel. screw tightly the wires
to the "Battery" terminal to the Battery.
Optional external Battery Temperature Sensor BTS
The solar controller provides an external temperature sensor, as an option, the unit provides a port
to connect the external battery temperature sensor; if the external battery temperature sensor is
connected, the unit will optimize the charging performance subjected to the battery temperature
detected and also provide the battery over temperature protection, in some case, if battery over
temperature occurs, the controller will automatically stop charging.
Wiring diagram
Refer to the below drawing, please cover the solar panel before connecting cables.
OPERATION - LCD DISPLAY-
Please check your battery manufacturer's specifications to select correct battery type. The unit
provides eight ( 8 ) battery types for selections: Lead crystal, Lithium-ion, LiFePO4, LTO, Gel, AGM,
WET (conventional lead acid), and Calcium battery.
P.4/8