Clarke CP254 운영 및 유지보수 지침 매뉴얼 - 페이지 5

{카테고리_이름} Clarke CP254에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CP254 13 페이지. Electric car polisher
Clarke CP254에 대해서도 마찬가지입니다: 운영 및 유지 관리 지침 (13 페이지)

페이지 인쇄

5. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool's

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits etc. In accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those

intended could result in a hazardous situation.

8. ns different from those intended could result in a hazardous situation.

SERVICE

1. Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

SPECIFICATION

Voltage

Vibration

Duty Cycle

No Load Speed

Sound Pressure Level (L

Sound Power Level (L

Dimensions (L x W x H)

Weight

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

dB)

230 V @ 50Hz

7.59m/s

K=1.5m/s

S1 Continuous

3200 rpm

65.7 dB(A)

76.7 dB(A)

255 x 245 x 220 mm

2.5 Kg