Clarke CROS3 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke CROS3에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CROS3 17 페이지. Random orbital sander

PREPARATION AND USE

FITTING A SANDING DISC

1. Select the disc to be used.

• This MUST be the correct

125mm diameter disc with

hook and loop backing.

2. Ensure the sander is switched off

and the plug is removed from the

socket.

3. Line up the holes in the disc with those on the sanding pad.

• This is necessary for dust extraction purposes.

4. Press the disc firmly onto the pad to secure it.

ADJUSTING THE AUXILIARY HANDLE

1. Loosen the handle adjustment

knob.

2. Adjust the handle to the required

position.

3. Retighten the handle adjustment

knob.

DUST COLLECTION

Slide the dust bag onto the outlet as

shown.

The dust bag must be emptied

regularly:- do not wait until it is

completely full.

The dust bag is emptied as follows.

1. Ensure the sander is not running.

2. Gently remove the dust bag assy

from the sander.

3. Take the dust bag to the dustbin and slip the bag off, (the bag has an

elasticated top), empty the bag into the bin.

4. Reassemble the dust bag assy and fit back on to the sander.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]