Directed Electronics 1000HF 소유자 매뉴얼

{카테고리_이름} Directed Electronics 1000HF에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics 1000HF 8 페이지. Python code hopping high frequency 6/96 change model 1000 owner's guide

페이지 인쇄

Security & Convenience

Expansions

Here we have listed only some of the many expansion options available.

Please consult your dealer for a complete explanation of all the options

available to you.

Field Disturbance Sensor: An invisible dome of coverage is established by

the 508T "radar" sensor. Your system can react to any intrusions into this field

with the triggered sequence.

Backup Battery: The 520T keeps the system armed, triggers the alarm and

keeps the starter kill active if main battery power is disconnected.

Electronic Hood Lock: This prevents the vehicle's hood from being opened

whenever the system is in alarm mode, keeping thieves away from the

system's siren, the battery connections, or other components under the hood.

Audio Sensor: Metal on glass, glass cracking, or breaking glass produce

distinctive acoustic signatures. The 506T and audio sensor uses a microphone

to pick up sounds, and then analyze them with proprietary acoustic software to

determine if the glass has been struck.

Power Trunk Release: The channel 2 output of the system can operate a

factory power release for the vehicle's trunk or hatch. (An optional relay may

be required.) If the factory release is not power activated, the DEI's 522T trunk

release solenoid can often be added.

Power Locks: This system offers lock outputs that can control some manufac-

turers' power door lock systems. For other systems, additional parts may be

required.

Valet

Start System: For the ultimate in convenience, the Valet

can start your vehicle, monitor engine functions, and power your climate

control system with a push of a button! Over-rev protection, open-hood

lockout, brake pedal shutoff, and automatic timer shutoff are all included.

(Only for automatic transmission, fuel-injected gasoline vehicles).

Power Window Control: Automatic power window control is provided with the

529T or 530T systems. These can operate power windows, and can roll them

up automatically when the system is armed, down when you transmit channel

2 or 3, or both up and down. The 530T also provides one touch switch opera-

tion.

start system

G438.696

95G438.PM5

6/96 CHANGE:

For DEI

Model 1000

Owner's Guide

•

Code Hopping™

•

High Frequency

This device complies with part 15 of FCC rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This

device must accept any interference received, including interference that may cause

undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this device.

O5F Chip