Clarke Woodworker CBS1-5 운영 및 유지보수 지침 매뉴얼 - 페이지 7
{카테고리_이름} Clarke Woodworker CBS1-5에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker CBS1-5 17 페이지. Belt/disc sander
Clarke Woodworker CBS1-5에 대해서도 마찬가지입니다: 운영 및 유지보수 지침 매뉴얼 (15 페이지)
페이지 인쇄
ASSEMBLY
BELT TABLE
1. Gently ease the table into place
with the belt support entering the
slot in the table.
2. Screw the Table Locking Lever into
place, ensuring a flat washer is
used on the levers' threads.
DISC TABLE
1. Slide the table pegs into the slots
in the Upper Disc Cover to the
extent that the Locking Levers
can be screwed in as shown
overleaf, ensuring flat washers are
used on the locking lever threads.
2. With the table secured, position
the Disc Cover/Dust Extraction
Port as shown, with the locating
pin on the cover 'A', engaged in
the slot in the hinged cover 'B'.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7