Clarke Woodworker CBS1-5B 운영 및 유지보수 지침 매뉴얼 - 페이지 6

{카테고리_이름} Clarke Woodworker CBS1-5B에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker CBS1-5B 16 페이지. Belt/disc sander

ASSEMBLY

SANDING BELT TABLE

1. Slide the belt into the slot on the

table.

2. Position the table so that the

machined slot below lines up with

the hole in the casting.

3. Use the handle and washer

supplied to fix the table into

position.

NOTE: The distance between the

belt and the table must be

no more than 1.5mm (1/16")

to prevent small pieces

slipping down between the

belt and table.

1. Use a suitable screwdriver to

remove the 3 screws and washers.

2. Place the dust extraction

moulding into position.

3. Use the screws you removed in

step 1 to fix into place.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]