Clarke Woodworker CS6-9C 운영 및 유지보수 매뉴얼 - 페이지 11
{카테고리_이름} Clarke Woodworker CS6-9C에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker CS6-9C 15 페이지. Belt & disc sander belt & disc sander
페이지 인쇄
Curves may be sanded as shown in Fig.
9A
.
..or the belt used in the vertical position
as shown in Fig.9B.
NOTE: The work stop has been removed.
DUST EXTRACTION
Provision is made for forced dust
extraction on both the disc AND belt.
The dust extraction outlets are shown in
Fig.10 and have an outside diameter
of 56mm (2
1
/
").
4
Connect a suitable hose to a vacuum
cleaner via a reducer, or Dust Extraction
device (see your Clarke dealer).
- 11 -
Fig. 9A
Fig. 9B
Fig. 10