Clarke Woodworker VRS1 운영 및 유지보수 - 페이지 5

{카테고리_이름} Clarke Woodworker VRS1에 대한 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke Woodworker VRS1 8 페이지. Vertical reciprocating sander

페이지 인쇄
(Stand)
PARTS DIAGRAM
IMPORTANT:
he use of parts other than CLARKE replacement parts may result in safety hazards,
T
decreased tool performance and may invalidate your warranty.
-11-

SAFETY PRECAUTIONS

WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
ALWAYS
1.
Learn the machines’ applications, limitations and the specific potential
hazards peculiar to it. Read and become familiar with the entire
operating manual.
ALWAYS
2.
use a face or dust mask if operation is particularly dusty.
ALWAYS
3.
check for damage. Before using the machine, any
damaged part, should be checked to ensure that it will operate
properly, and perform its intended function. Check for alignment of
moving parts, breakage of parts, mountings, and any other condition
that may affect the machines’ operation. Any damage should be properly repaired
DO NOT
or the part replaced. If in doubt,
ALWAYS
4.
disconnect the tool/machine from the power supply before servicing and
when changing accessories.
ALWAYS
5.
wear safety goggles, manufactured to the latest European Safety Standards.
Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.
ALWAYS
6.
keep work area clean. Cluttered areas and benches invite accidents.
ALWAYS
7.
ensure that adequate lighting is available. A
minimum intensity of 300 lux should be provided. Ensure
that lighting is placed so that you will not be working in your
own shadow.
ALWAYS
8.
keep children away. All visitors should be kept a
safe distance from the work area, especially whilst operating
the machine.
ALWAYS
9.
maintain machine in top condition. Keep tools/machines
clean for the best and safest performance. Follow maintenance
instructions.
ALWAYS
10.
handle with extreme care do not carry the tool/machine
by its’ electric cable, or yank the cable to disconnect it from the
power supply.
ALWAYS
11.
ensure the switch is off before plugging in to mains. Avoid accidental starting.
ALWAYS
12.
concentrate on the job in hand, no matter how trivial it may seem. Be aware
that accidents are caused by carelessness due to
familiarity.
ALWAYS
13.
keep your proper footing and balance at all
times don’t overreach. For best footing, wear rubber
soled footwear. Keep floor clear of oil, scrap wood, etc.
use the machine. Consult your local dealer.
-4-