Clarke 7230292 운영 및 유지보수 지침 매뉴얼 - 페이지 2
{카테고리_이름} Clarke 7230292에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7230292 17 페이지. De-watering pump
페이지 인쇄
INTRODUCTION
Thank you for purchasing this CLARKE submersible pump.
The CLARKE range of submersible pumps are suitable for discharging pools,
ponds, fountains, pits and any waste water drainage. They can handle foul
water containing suspended material as stated in the specification. The
pumps are not suitable for handling inflammable, corrosive, explosive or
dangerous liquids. The pump is water-cooled and does not contain any oil.
The 'Pump Performance Curve' graph shown, displays the characteristics
graphically and describes the relation between the flow-rate and the head
for the pump.
Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.
SPECIFICATIONS
Voltage
Ingress protection
Outlet Thread Diameter
Rated Power Output
Maximum Head Height
Maximum Depth
Maximum Flow
Maximum Operating Temperature
Maximum Particle Size in Suspension
Weight
Cable Length
Dimensions (D x W x H)
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
230V~50Hz
IP68
2"BSP
500 W
12 m
8 m
240 l/min
o
40
C
7 mm
13 kg
10 m
250 x 175 x 365 mm
2