Clarke 7260065 운영 및 유지보수 지침 매뉴얼 - 페이지 9
{카테고리_이름} Clarke 7260065에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 7260065 12 페이지.
페이지 인쇄
CLEANING AND MAINTENANCE
MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY
BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.
•
With the exception of replacing the impeller, these pumps should require no
maintenance other than regular cleaning. If the pump starts to show signs of
wear or damage, contact your CLARKE dealer for advice.
•
Do not attempt any other repairs to the pump, any other repairs must be
carried out by your CLARKE dealer, or contact the CLARKE Service Department,
on 020 8988 7400.
•
Check the pump regularly to ensure the base is clear of leaves or other debris.
Replacing the Impeller
1
Remove the 3 screws on the base cover and pull off the base cover.
2
Remove the 3 screws from the impeller cover, and remove the impeller cover.
3
Use a 13mm spanner to remove the nut.
4
Remove the impeller from the shaft.
5
Replace with a new impeller and lock it in place using the nut removed in step 3.
6
Replace the impeller cover and then replace the base cover.
1
3
WARNING!
2
4
9